真空解吸變壓吸附制氧設備(Vacuum Desorption PSA Oxygen Plant)

流程簡介:

原料空氣經過濾去粉塵,進入鼓風機增壓,進入吸附器,空氣中的N2, H2O、CO2及碳氫化合物被吸附劑吸附,同時獲得氧氣,吸附塔吸附飽和後,自動切換,該吸附器減壓抽真空再生,本設備有三個吸附塔交替使用,連續獲得氧産品,氧産品經過氧壓機壓送至用戶,氧壓機壓力可根據用戶要求設置。

PROCESS DESCRIPTION
After removal of dust by the suction filter, the feed air is pressurized by the air blower and led to the adsorber. Nitrogen, moisture, carbon dioxide in the air are adsorbed by adsorbent, oxygen gas is obtained at the same time. When the adsorption is saturated, the system will change over automatically, then the adosrober will be depressurized and vacuumized for regeneration. There are three adsorbers working alternatively to obtain product oxygen continuously. The product oxygen is delivered to the User after being compressed by the oxygen compressor at the pressure specified by the User.

VPSA制氧設備流程示意圖:PROCESS FLOW SHEET OF VPSA OXYGEN PLANT


型號規格

型號
Model

氧氣純度
O2 Purity

氧氣輸出壓力
O2 Output Pressure
氧氣産量
Nm3/h
O2 Output
裝機功率
Kw
Power
冷卻水(循環)
Nm3/h
Cooling Water (Recycling)
VSAO-200 90%至95% 0.005MPa 200 120 1.2
VSAO-300 300 160 1.5
VSAO-350 350 185 2.0
VSAO-400 400 235 2.4
VSAO-500 500 265 2.58
VSAO-600 600 320 2.6
VSAO-700 700 360 2.7
VSAO-800 800 445 3.3
VSAO-900 900 487 5.0
VSAO-1000 1000 575 6.0
VSAO-1200 1200 635 6.0
VSAO-1300 1300 720 7.2
VSAO-1500 1500 790 7.2
VSAO-1600 1600 990 8.2
VSAO-2000 2000 1215 8.2


通用條件:
電力:高壓電源、低壓電源:3相
冷卻水:溫度≤32℃


Utilities:
Power: HT & LT power supply: 3-phase
Cooling Water: Temperature ≤32℃

安裝場地:非防爆地區
Installation Area: Non Explosion-proof Area

設備主要配件